Disposable Medical Supplies Sterile PVC with Cuff Suction Type Tube for Intensive Care

• Customization: Available
• Type: Anesthesia & Respiratory
• Material: PVC
• Model NO.: Suction Type With Cuff 6.5mm-9.0mm
• Ethylene Oxide Sterilization: Ethylene Oxide Sterilization
• Quality Guarantee Period: 5 Years
• Group: Adult, Pediatric
• Logo Printing: With Logo Printing
• Product Name: Endotracheal Tube Suction Type with Cuff
• Size: 6.5mm-9.0mm
• Certificate: CE/ISO
• Box Specification: 42X38X32 Cm
• Storage Conditions: Store in Dry, Ventilated and Cool Place.
• Packing: 1PC/Blister Bag, 5PCS/Box, 50PCS/CTN
• Transport Package: Corrugated Box
• Trademark: Kind Rain
• Origin: Guangdong, China
• HS Code: 9018390000
• Production Capacity: 200000 PCS/Month

Product Description

Product Description

The Suction type Endotracheal tube is a medical device. It is intended for oral or nasal intubation and for airway management and clearing secretions in the upper respiratory tract. The endotracheal tube is sterile and designed for single-use only to prevent infections.

Product Specification

Features

• Murphy
• For anaesthesia and intensive care
• High volume,low pressure
• X-ray

Specifications	Designated size (Nominal inside iameter) mm	Nominal outside diameter mm	Cuff nominal diameter mm	Minimum length of tube, A(oral/nasal) mm
Cuffed 6.5mm	6.5	8.8	22	290
Cuffed 7.0mm	7.0	9.4	22	300
Cuffed 7.5mm	7.5	10.0	24	310
Cuffed 8.0mm	8.0	10.7	26	320
Cuffed 8.5mm	8.5	11.3	26	320
Cuffed 9.0mm	9.0	12.0	/28	320

Product Picture

Intended purpose
The Endotracheal tube with suction lumen is intended into the trachea for the primary purpose of establishing and maintaining a patent airway and to ensure the adequate exchange of oxygen and carbon dioxide. There is a suction lumen can clearing secretions in the upper respiratory tract.

Suggested instruction for use-cuffed ETTs

1. Healthcare professionals should check patients' trachea at first, in order to select the appropriate specification and confirm that the ETTs should be inserted into trachea through the oral or nasal;
2. Carefully remove the sterile tracheal tubes from its protective packaging;
3. The patency of the main tube lumen should be visual checked prior to intubation;
4. Check the cuff, pilot balloon and valve for leak-proofness and integrity prior to use (Insert a Luer syringe into the Luer adapter for the filling system and inject enough air to fully inflate the cuff);
5. After the test inflation of the cuff, completely evacuate the air;
6. Intubate the patient following currently accepted medical techniques, a laryngoscope should be used to check the inserted condition of endotracheal tubes;
7. Once the patient is intubated, a Luer syringe or an appropriate VBM cuff pressure gauge should be used to inflate the cuff with just enough air to provide an effective seal of the trachea. The cuff pressure should normally not exceed 2.5kPa;
8. Fix the tube of the patient following currently accepted medical techniques;
9. Check that the inflating system is not leaking. Cuff pressure should be measured and the integrity of the system should be verified periodically during the intubation period. Any deviation from the selected sealing pressure should be investigated and corrected immediately;
10. Patient conditions should be monitored during intubation period, and sputum should be cleaned;
11. Prior to extubation, deflate the cuff by inserting a syringe into the cuff filling system and removing all of the air contained within the cuff until the pilot balloon has collapsed;
12. Extubate the patient following currently accepted medical standards. Dispose of the tracheal tube.

Contraindication

• Throat edema
• Acute inflammation of trachea
• Tracheal compression of thoracic aortic aneurysm
• Severe bleeding
• Cervical spinal injuries

Cautions, Warnings and Reminders
This product is disposable products, read the instructions carefully before use.

Product safe disposal
Used Endotracheal Tube and its handling of accessories should be disposed in sanitary container to prevent possible contamination and cross infection.

Storage Conditions
Store in a dry, well-ventilated, cool place, away from harmful substances

Hot Products

Certificate Display

Packaging & Shipping

FAQ

1. Why choose us?

We have complete certificate CE/ISO/FSC etc. We are a good brand and have Competitive price & Fast leading time. Best service & Good reputation.

2. How can get your samples?

We provide free samples if the sample value is not much.

3. How fast can we get the goods?

Usually the production time is 30 days.

4. Can you do OEM printing?

Yes, we can offer OEM service. You can also choose Kind Rain brand or neutral English packing.

5. What services can we provide?

Accepted Delivery Terms: FOB, CFR, CIF, EXW. Accepted Payment Currency: USD, EUR, CNY. Accepted Payment Type: T/T, L/C, Western Union/Paypal/Credit card.

6. How can you do the quality control?

We had a professional QC team, which experience over 10 years. They take every progress controlled.