Medical Supplies Sterile PVC with Cuff Suction Type Tracheal Tube with Murphy Eye

• Customization: Available
• Type: Anesthesia & Respiratory
• Material: PVC
• Model NO.: Suction Type With Cuff 6.5mm-9.0mm
• Ethylene Oxide Sterilization: Ethylene Oxide Sterilization
• Quality Guarantee Period: 5 Years
• Group: Adult, Pediatric
• Logo Printing: With Logo Printing
• Product Name: Endotracheal Tube Suction Type with Cuff
• Size: 6.5mm-9.0mm
• Certificate: CE/ISO
• Box Specification: 42X38X32 Cm
• Storage Conditions: Store in Dry, Ventilated and Cool Place.
• Packing: 1PC/Blister Bag, 5PCS/Box, 50PCS/CTN
• Samples: Us$ 1.6 /Piece 1 Piece(Min.Order)
• Transport Package: Corrugated Box
• Trademark: Kind Rain
• Origin: Guangdong, China
• HS Code: 9018390000
• Production Capacity: 200000 PCS/Month

Product Description

Product Description

The Suction type Endotracheal tube is a medical device. It is intended for oral or nasal intubation and for airway management and clearing secretions in the upper respiratory tract. The endotracheal tube is sterile and designed for single-use only to prevent infections.

Product Specification

Features

• Murphy
• For anaesthesia and intensive care
• High volume,low pressure
• X-ray

Specifications	Designated size (Nominal inside iameter) mm	Nominal outside diameter mm	Cuff nominal diameter mm	Minimum length of tube, A(oral/nasal) mm
Cuffed 6.5mm	6.5	8.8	22	290
Cuffed 7.0mm	7.0	9.4	22	300
Cuffed 7.5mm	7.5	10.0	24	310
Cuffed 8.0mm	8.0	10.7	26	320
Cuffed 8.5mm	8.5	11.3	26	320
Cuffed 9.0mm	9.0	12.0	/28	320

 
 

Product Picture

Intended purpose

The Endotracheal tube with suction lumen is intended into the trachea for the primary purpose of establishing and maintaining a patent airway and to ensure the adequate exchange of oxygen and carbon dioxide. There is a suction lumen can clearing secretions in the upper respiratory tract.
 

Suggested instruction for use-cuffed ETTs

1. Healthcare professionals should check patients' trachea at first, in order to select the appropriate specification and confirm that the ETTs should be inserted into trachea through the oral or nasal;
2. Carefully remove the sterile tracheal tubes from its protective packaging;
3. The patency of the main tube lumen should be visual checked prior to intubation;
4. Check the cuff, pilot balloon and valve for leak-proofness and integrity prior to use (Insert a Luer syringe into the Luer adapter for the filling system and inject enough air to fully inflate the cuff);
5. After the test inflation of the cuff, completely evacuate the air;
6. Intubate the patient following currently accepted medical techniques, a laryngoscope should be used to check the inserted condition of endotracheal tubes;
7. Once the patient is intubated, a Luer syringe or an appropriate VBM cuff pressure gauge should be used to inflate the cuff with just enough air to provide an effective seal of the trachea. The cuff pressure should normally not exceed 2.5kPa;
8. Fix the tube of the patient following currently accepted medical techniques;
9. Check that the inflating system is not leaking. Cuff pressure should be measured and the integrity of the system should be verified periodically during the intubation period. Any deviation from the selected sealing pressure should be investigated and corrected immediately;
10. Patient conditions should be monitored during intubation period, and sputum should be cleaned;
11. Prior to extubation, deflate the cuff by inserting a syringe into the cuff filling system and removing all of the air contained within the cuff until the pilot balloon has collapsed;
12. Extubate the patient following currently accepted medical standards. Dispose of the tracheal tube.

 

Contraindication

• Throat edema
• Acute inflammation of trachea
• Tracheal compression of thoracic aortic aneurysm
• Severe bleeding
• Cervical spinal injuries

 

Cautions, Warnings and Reminders

This product is disposable products, read the instructions carefully before use.
 

Product safe disposal

Used Endotracheal Tube and its handling of accessories should be disposed in sanitary container to prevent possible contamination and cross infection.

Hot Products

Certificate Display

Packaging & Shipping

FAQ

Welcome to Guangzhou Kind Rain Medical Co., Ltd.

Why choose us?

• Complete certificates: CE/ISO/FSC, etc.
• Competitive pricing and fast lead times
• Best service and good reputation

How to get samples?

• Free samples available for samples of low value

How fast can you get the goods?

• Production time usually 30 days

Can we do OEM printing?

• Yes, we offer OEM services
• Option to choose Kind Rain brand or neutral English packaging

What services do we provide?

• Accepted Delivery Terms: FOB, CFR, CIF, EXW
• Accepted Payment Currency: USD, EUR, CNY
• Accepted Payment Type: T/T, L/C, Western Union/Paypal/Credit card

How do we ensure quality control?

• Professional QC team with over 10 years of experience
• Stringent quality control at every stage of production